For sale from Turbo old PPE:
Race Tech seat, Turbo custom head rest removel, comes with rear heat shield, prefer if you come and get it cause shipping going to be a ton-$75.00
Crow Enterprises safety harness purpleolder style. 1 3/4 width complete, used, weather beaten, make offer.
Stock skid plate, used but will bolt right up. Make offer.

Any pics of the seat?
You need a new harness for this project?

I do yes. Was going to buy 1 from CROW Enterprises do you ave 1 by chance?
Will get some pictures up tomorrow.

Brand new in the box, same as last last one the you got from me. I'll pm you.

Whats wrong with the seat? or not to your liking? That was the most comfortable seat I've been in!!! with a well built skid plate to protect the privates!!!

If your over 6 feet its worthless just like in the Pilot, I got in and out of that 350 about 5 times and was ready to rip out the seat and throw it in the dumpster I was never comfortable setting in it because it makes everything cramped I guess if the cockpit area was 6" longer it would be ok.

You happen to have the cable choke parts for the 350, the cable parts that were on it go to that Mikuni assume you had to remove the stock stuff to install the mikuni stuff I had to install a manual choke valve plug the hole on the 39mm PWK lol be nice to go back to the cable choke....

Well being short does have its privilages! Lol
As far as I remember the cable ends are stock, and there should be a plunger that swapped out! Let me look on my table in the house that I had all that stuff on!
For anyone interested in the seat, this is a direct bolt in seat, with a good skid plate on it!

Yeah let me know if you find please, seat would prolly work great in my VW bug where their is more leg room I need to change the seats (at least drivers seat) before I do too much offroading with it, those stock buckets in the VW suck even with a 4 point harness I don't see me being in control when I hit the bumps lol, I have a pair of stock RZR seats that might be the nuts for the VW

Take a picture of what's on there now! A quick glance I found a manual plunger with no need for the cable and the part that threads into the hole on carb! But no plunger? Not remembering what had to be done on kit?

There is nothing on the end of the cable Turbo. It is just a plain cable end. The choke kit for the 350 is just like the Pilot, it has the little spring, plunger and the black end that screws into the carb.
I can't use the seat either, as Hoser explained I am 6-4 and my knees hit the steering wheel badly with that seat installed. When using a Pilot seat it gives me several more inches of room plus which help greatly!
The seat would be a great add on for anybody with a Ody for sure! I'll include the older purple harnesses with the sale as well for members only!
Turbo, if you can find the choke kit it would be very much appreciated as I currently have Hoser's manual choke in the carb.

I found the black piece that screws into the top of the carb! But the plunger and spring I haven't found yet???

Hi Mud, if turbo doesn't have any luck finding it I'm pretty sure I have what you need. I have an old cable that's stuck so if there's a piece on it you can use just let me know.

I could use it sir please yes. Can you send me a PM?
Trubo, can I get that black end from you as well please?
Still waiting on a floor tub-PPE all apart waiting for the arrival. I want to ride this weekend so I am hoping it comes tomorrow.

PM sent